V592964 Blain EV100-2 | 2" Hydraulic Elevator Control Valve

This Blain EV100/2 hydraulic elevator control valve is a replacement for legacy part number V592964. The 2" valve configuration provides adjustable hydraulic control of elevator acceleration, deceleration, leveling speed, and stopping functions for smooth travel and accurate floor leveling.

Designed for hydraulic elevator applications, the EV100 uses compensated pilot control to maintain consistent valve operation across changing loads and oil temperatures. Hardened internal wear surfaces, integrated filtration, turbulence suppression, and continuous-duty solenoids contribute to dependable operation in demanding elevator systems.

This configuration is supplied with four 110VAC CSA-certified coils and is suitable for modernization, repair, and replacement applications where the original hydraulic elevator system calls for a V592964-equivalent 2" EV100/2 control valve.

• 2" hydraulic elevator control valve
• EV100/2 configuration
• Replacement for legacy part number V592964
• Flow range: 30–800 L/min (8–211 US GPM)
• Operating pressure range: 8–100 bar (116–1,450 PSI)
• Pressure drop (P–Z): 4 bar (58 PSI) at 800 L/min
• Burst pressure: 505 bar (7,324 PSI)
• Weight: approximately 10 kg (22 lb)
• Coil configuration: 4 × 110VAC CSA-certified solenoids
• Solenoid rating: 0.43 A, 50/60 Hz
• Insulation class: IP68
• Oil viscosity range: 25–60 cSt at 40°C (104°F)
• Maximum oil temperature: 70°C (158°F)
• Adjustable up and down acceleration, deceleration, leveling, and stopping functions
• Pressure-compensated hydraulic control
• Integrated pilot and main-line filtration
• Hardened internal wear surfaces

For safe and reliable elevator operation, hydraulic control valves should be installed and serviced only by qualified elevator personnel. Proper installation, adjustment, and system verification help ensure the valve performs as intended within the elevator system's specified operating requirements.