Accordion Gate Replacement - TK Lev, Symmetry, Cemco, and Others

EMI Porta manufactures versatile accordion gates that are commonly used to replace aging accordion-fold gates found in many residential elevators including LEV, Symmetry, Cemco, Custom Elevator, HomeLift, Inclinator, Dover, and so many more.

These gates can suit any interior design with a wide variety of materials and finishes while also ensuring reliable operation.

Please use the form below after meticulously reviewing the available options and gate measuring guide.

HARDWOOD PANELS:

VINYL LAMINATE:

GUIDE FOR GATE MEASURING:
Gates are made to order. They are not returnable.
"Measure twice. Cut once."
Only full-sized panels apply to "panel quantity". Partial panels are excluded from count.

• Stack Width: New compliance requirements dictate that the panel width must be at least 5.13". Please ensure that your pocket can accommodate a stack width of 5.13"
• Sill Depth: If your sill depth is less than 0.55", additional help may be needed to ensure proper replacement for your gate.

• Pin Position: Pin positioning is critical for fit and function.
  Center Pin is positioned precisely in the center of the panel.
  TKA Offset, commonly found it ThyssenKrupp LEV units, is positioned slightly offset-center at approximately 1.44" from the outside edge of the panel.
  Porta Standard Offset is even more off-centered at about 1.063" from the outside edge of the panel.
• Double-lead Post**: These gates features a mounting lead at both ends of the gate. This is found when a more precise gate width is required. Double-lead gates will feature an odd number of panels with an offset hinge, and they must be mounted inside of the car.
  
  
  
• Gate Handing: When standing outside of the cab looking in, a left-handed gate will collapse at your left side. Alternatively, a right-handed gate will stack on the right side of the cab as viewed from outside the car looking in.
• Cab  Height: Measured from the top of the sill to where the gate track mounts.
• Cab Width: Measured from the pocket wall to the other side of the cab. Not measured as the clear opening of the cab.

Important Notice for Custom Accordion Gate Quotes

This form is for quotation purposes only and does not finalize a purchase. The details you provide will allow us to generate a detailed quote based on your specifications.

We understand that providing measurements and specifications can be challenging as you might not fully understand the terminology that we use. While we are happy to clarify definitions and terminology, all final decisions regarding measurements, finish color, panel quantity, and other specifications are the customer’s responsibility.

After submitting this form, you will receive a detailed quote for review. You will have the opportunity to verify all details before finalizing your purchase. Lift Parts Pro cannot be held responsible for errors in measurements or selected specifications.

By submitting this form, you acknowledge that the provided information is for quotation purposes and that Lift Parts Pro is not liable for inaccuracies in measurements or selections.

📞 Need Help? If you have any questions about the form or need assistance understanding the specifications, please Contact Us before submitting your request.